Speed Queen Bearing Change
While the Tech worked on the trunnion and some other items I used the time to do some cleaning around the front of the machine.
Tag Speed Queen
Grouting A Washer Base
Grouting A Washer Base When a hard mount washer is installed the steel base is bolted to the concrete, hence the name hard mount. Soft mount washers are not bolted down. The reason is that…
IPSO / Speed Queen Water Valve Leak and Change
The failures I have had on these valves have all been in the same place on the valve. Some valves fail due to solenoid issues, dirt in the lines and other similar issues.
Thermal Imaging Tour of a Speed Queen Dryer
As part of some dryer testing I have been doing I used my Thermal Imaging Camera to look at the dryers and some hot spots.
Speed Queen Washer Shock Absorber Change
Speed Queen Washer Shock Absorber Change Over time the shock absorbers in the Speed Queen / IPSO soft mount washers will wear out. At this point, they become just a set of springs. …
IPSO / Speed Queen Washer Not Draining
IPSO / Speed Queen Washer Not Draining A complaint we receive occasionally is that the small Horizon style front load washers “Didn’t spin my clothes out”. There may be a couple of issues that cause…
Changing a Drain Pump Tube on a Speed Queen , IPSO Washer
Changing a Drain Pump Tube on a Speed Queen , IPSO Washer There was a small leak under one of the small IPSO washers. After some looking around I found the drain tube from the…
Speed Queen Washer Not Rinsing
Speed Queen Washer Not Rinsing And / Or Stuck at __ minutes.
I was recently out of town and got a call that one of my Speed Queen washers was having pr